Rosineer GRIP rosin press is easy to learn and use when extracting solventless oil even at home. Just enter your desired settings into the precise two-channel temperature and timer controller, wait until the 3" x 5" insulated plates heat up, and rotate the twist handle to apply up to 5000 - 5500 lbs pressure. When done pressing, rotate the handle counterclockwise, remove your pressed material, and enjoy the freshly squeezed rosin. The GRIP can be assembled in two configurations: with or without the supporting legs. If assembled without the legs, the press can be affixed to a work table or bench with screws for extra stability. The press machine comes with a user's guide, AC power cord, and a free starter kit that contains a non-stick silicone mat, 3 ml lidded jar, two collection tools, a pack of parchment paper sheets, and four magnets.
Important notice: Please always keep the machine out of children's reach.
Rosineer PRESSO is available in two versions: 110V for North American and 220V for European and Australian customers.
- Maximum pressure: 5500 lbs / 2.5 Ton
- Heating plate size: 3" x 5" / 7.6 x 12.7 cm
- Temperature range: up to 449 °F / 232 °C
- Temperature scale: Fahrenheit / Celsius
- Timer: up to 999 seconds
- Power: 825 W
- Current: 7.5 A / 3.75 A
- Voltage: 110V / 220V
- Weight: 25 lbs / 10.2 kg
- Total Weight: 30 lbs / 13.5 kg
- Packing Size: 14.6 x 13.8 x 8.7 inch / 37 x 35 x 22 cm
- Discreet packaging
- Limited Warranty: 2-Year
What is rosin and how it is produced?
Rosin is a concentrated extract of cannabis plant which is produced by applying heat and pressure to the plant parts (usually flowers or hash and kief) to squeeze out a translucent, sappy substance.
What do I need to start making rosin?
You need a rosin press, a parchment paper sheet, a collection tool, and your precursor. Additional items that you may want to use when pressing rosin are filter bags, pre-press molds, non-stick mats, etc.
How do I make rosin?
- Prepare your plant material. Make sure it is kept at the optimal 62% humidity.
- Place the plant in a folded parchment paper sheet.
- Turn on your press machine and set your desired temperature and timer.
- When the press plates reach the right temperature, place the parchment paper with your plant material on the bottom plate and operate the machine according.
- When done, remove the parchment paper, get rid of the pressed plant parts, and gather rosin using your collection tool.
What are the recommended press settings?
For Cold Pressing: 160°F - 190°F, for 1 to 5 minutes or longer. Cold pressing produces terpene-rich rosin but with a sacrifice in yield.
For Hot Pressing: 190°F - 225°F, for 40 seconds to 3 minutes. The hotter you press, the higher yield you’ll get, but the high temperature causes a drop in rosin quality.
Flowers can be pressed at 190°F - 225°F for 30 - 180 seconds.
Refined precursors such as hash, kief, dry sift are usually pressed at 165°F - 195°F for 60 - 130 seconds.
What filter bags should I use?
We carry three mesh sizes: 25, 100, and 160 microns. 25 micron bags are best used with fine grain materials such as kief, bubble hash, and dry sift. 100 micron bags give the best filtration and highest quality output for flower rosin, but you may see some reduction in yield. 160 micron filters are usually the optimal type of bags for flowers; they result in good yield and quality rosin.