Rosineer BOOST-6 Quick Start Guide

1. Position your machine on a sturdy flat table surface.
2. Use the jack handle to tightly close the release valve.
3. Plug the press into an electrical outlet using the enclosed cord and flip the power switch.
4. Enter your press parameters (temperature, time, and temperature scale) using Set, Up, and Down buttons. Please follow the press manual for detailed descriptions and visual guides. Once the parameters are saved, the plates start heating.
5. Wait until the plates reach the set temperature and the heating indicators are turned off.
6. Position your precursor in the center of the bottom plate.
7. Gently pump the jack handle to close the plates and apply desired pressure. 
8. Press the Timer button to start the countdown.
9. Wait until the countdown ends and the press starts beeping.
10. Use the jack handle to release the bottle jack valve and open up the plates.
11. Remove your pressed material using tools or heat resistant gloves.
12. Press the next batch or flip the switch to turn off and unplug it from the outlet.