SHOW SIDEBAR
Rosineer GRIP Quick Start Guide

1. Attach the leg support parts to the GRIP press if you plan on moving the press around or secure it to your work surface using the enclosed table brackets. Use the press manual for detailed instructions on how to assemble the press. 
2. Attach the press handle and connect the press heating cables to the control panel. Refer to the visual guides in the manual.
3. Plug the press in and flip the On/Off switch to turn on the machine.
4. Enter your desired press parameters (temperature, time, and temperature scale) using the press control panel. Please follow the press manual for detailed descriptions and visual guides or see the video below (the control panel is universal for all our presses).
5. Wait until the plates reach the set temperature.
6. Twist the handle counterclockwise to open up the plates if they are still closed.
7. Position your precursor in the center of the bottom plate.
8. Twist the handle clockwise to close the plates and apply pressure.
9. Start the timer by pressing Timer button.
10. When the timer countdown ends, press Timer button again to turn it off.
11. Twist the handle counterclockwise to open up the plates.
12. Remove your pressed material using tools or heat resistant gloves.
13. Press the next batch or flip the switch to turn off the press and unplug it from the outlet. 

Amount Per Load: Up to 10 grams
Recommended Accessories
Pre-Press Mold 2.5" x 2.5" Square
2" x 4" Rectangular
Filter Bags 2" x 4" (36, 72, 90, 120 micron or Mixed options)
2" x 4.5" Value Pack (36, 72, 90, 120 micron options)
3" x 5" (36, 72, 90, 120 micron options)
2" x 200" Filter Tube (36, 72, 90, 120 micron mesh options)
Parchment Paper 10" x 7" pre-cut, 50 sheets per set
12" x 15" pre-cut, 100 sheets
6" x 8" PTFE sheets, 12 total
Tool set Cleaning Tool Kit
Cooling Plate 6" x 8" Cooling / Warming Plate

 


 

 


GRIP Press Leg Assembly


Control Panel Setting: universal for all Rosineer presses