SHOW SIDEBAR
Rosineer PRESSO Quick Start Guide

1. Place the PRESSO on a sturdy flat surface and remove the plates shield (cover). Plug in the press machine.
2. Rotate the pressure wheel to adjust the vertical position of the top platen to better control pressure between the plates during operation.
3. Flip the switch to turn on the press and lift up the lever.
4. Enter your desired press parameters (temperature, time, and temperature scale) using the press control panel. Please see the manual for detailed description and visual guides.
5. Wait until the plates heat up to the set temperature.
6. Position your material in the center of the bottom plate.
7. Lower the press lever closing the plates and applying pressure. Let go of the lever. The pressure will be maintained.
8. Start the timer by pressing Timer button.
9. When the countdown ends, press Timer button again to cancel it.
10. Lift up the lever opening up the plates.
11. Remove your pressed material using tools or heat resistant gloves.

Amount Per Load: Up to 5 grams
Recommended Accessories
Pre-Press Mold 1.5" x 1.5" Square
Cylinder
Filter Bags 2" x 3" (36, 72, 90, 120 micron or Mixed options)
2" x 4" (36, 72, 90, 120 micron or Mixed options)
2" x 200" Filter Tube (36, 72, 90, 120 micron mesh options)
Parchment Paper 10" x 7" pre-cut, 50 sheets per set
6" x 8" PTFE sheets, 12 total
Tool set Dabbing & Cleaning Tool Kit
Cooling Plate 6" x 8" Cooling / Warming Plate